High in the flight sim sky

In this how to we are going to look how we can configure our flight plan manually in our navigation system from our Cirrus SR22.

Route being configure will be from Courchevel (LFLJ) to Grenoble Le Versoud Airport (LFLG).

Let’s get ready and configure the flight plan.

In this how to we are going to look how we can configure our flight plan manually in our navigation system from our Daher TBM 930. Our airplane is parked at Reykjavik (BIRK) airport and we are almost ready to leave. But before that we need to setup our navigation system so it contains the waypoints we use to navigate to fly to our destination Vestmannaeyjar Airport (BIVM).

Before we can set the flight plan we will have a look at how to power on the airplane. If you are used to a Cessna it will take some time before you might have found the correct buttons, hint look above your head.

Let’s get ready and configure the flight plan.

In this how to we are going to look how we you can refuel during the bush runs which are part of Flight Simulator 2020. I think it was in the 5th or 6th leg of the bush trip when the engine of the aircraft suddenly stopped. Once that happened I looked t the fuel meter and saw it was almost empty… At that moment I thought I should have checked the fuel level prior to departing. So a good learning point for next time. Since there was no other airport near me the only way was to safely land somewhere else, I chose to land near the road. Once landed I went back and looked at the airports I landed before and found one which I could use to land. Now you of course want to know which one? Check the video and you will find out.

In this video I will show you how you can manually set the flight plan in a Beechcraft King Air 350i. Our aircraft is parked at Chicago O’Hara International Airport (ORD) and we want to make a short flight to Chicago Rockford International Airport (KRFD). Before we can configure the flight plan we need to start the electric system. Once that has been done we can continue to punch in the flight plan using the navigation system from our Beechcraft King AIr 350i.

In this video I will show you how you can manually modify flight plan files created by Flight Simulator 2020. We will start with planning a flight using the build in route planner from Flight Simulator 2020. Before we can use the tool correctly we need to enable some additional options so we see some additional beacons on the map. One thing you will find out when using the tool is that it sometimes makes decision you didn’t had in mind. If that is the case save the flight plan and modify it. How? Let me show your in this video.